Generic USB Joystick not working in Retroarch
Pi Model or other hardware: PC, POP! OS 21.10 on a ASUS M5A97, AMD 8350, 16GB DDR3 1600, Asus Nvidia 960, PNY SSD
RetroPie Version Used (eg 3.6, 3.8.1, 4.1 – do not write latest): 4.7.21
Built From: git clone –depth=1 https://github.com/RetroPie/RetroPie-Setup.git
USB Devices connected: Keyboard, Mouse, Bluetooth adapter 4.0
Controller used: 8Bitdo SN30Pro, Generic USB Joystick (USB N64 Controller)
Error messages received: Generic USB Joystick not configured The USB joystick configured and works fine in Emulationstation but when I launch any rom when Retroarch loads I get the message that the Generic USB Joystick is not configured. I’ve tried to configure it manually but it still says the same message and doesn’t work. I’ve been using a fresh install and have been at it for a few days now and can’t find a solution. There has to be a way to manually enter the info required to configure this joystick. Any information is appreciated. John
mitu Global Moderator
отредактировано mitu
If you configured the joystick in ES and it works, it should have saved a RetroArch configuration profile in /opt/retropie/configs/all/retroarch-joypads – a .cfg name with the same name. The reason it’s not working with RetroArch may be the joystick’s name – RetroArch is detecting a name that could be different than what ES has named the .cfg file. Can you run the following command (with the joystick plugged in) and post the output ?
cat /proc/bus/input/devices Post also the contents of the .cfg file for the gamepad that ES has saved in /opt/retropie/configs/all/retroarch-joypads .
Impman66 @jas51384
отредактировано
@jas51384 I had a similar issue, as @mitu says if you can (Best way is to load WinSCP on your PC/laptop and connect to pie that way, but you have to quit ES first (F4 on keyboard). Navigate to the /opt/retropie/configs/all/retroarch-joypads folder and check the joystick is correct. If not look in the udev folder and it should be in there, simply copy it from there and paste it in the folder above, deleting if necessary the wrong one. That is what I had to do.
Also, if you go to the Setup Menu in ES Options, and select Retroarch, then when it opens, go to Settings/Controls/Port 1 Binds it will show you what device Retroarch is looking for – I did this to find out it was the wrong one! Hope it helps a little
Pi Model or other hardware: Raspberry Pi 3 Model B
Power Supply used: Generic 5v 2.5A Panasonic
RetroPie Version Used : 4.5.1
Built From: Retropie website
USB Devices connected: 2 x Dragonrise N64 Encoders
jas51384
отредактировано
Oddly enough, I downgraded the OS to 20.04 LTS and reinstalled Retropie. After this everything seems to be working fine right now. I think the newer OS’s are using something that messes up the usb on the PC’s or it’s trying newer stuff. Either way it’s currently working and if it happens again I know to check the name of the cfg files and contents to make sure they match between retroarch and emulationstation.
mitu Global Moderator @jas51384
отредактировано mitu
@jas51384 It’s probably this issue ? If it’s so, then you don’t need to downgrade, you just need to rename the .cfg file and it will be fine.
jas51384 @mitu
отредактировано
@mitu I will remember that and now have a thread to fall back on if I forget in the future. Thank You
陈戌源说道：到我房间里来，把双肩包往我沙发上一situs kiu online放，说陈主席恭喜你、祝贺你，希望能够多关照，然后我说什么东西，他说老规矩了，我们都这样。
美国政策决策圈人士表示，他们预计俄乌冲突最终仍将通过谈判解决，但他们不认为俄罗斯总统普京今年会认真考虑谈判，部分原因是他对特朗普在11月胜选并结束援乌抱有希望。去年12月，普京在俄国防部部务会议上situs kiu online发表讲话说，如果乌克兰、美国和欧洲愿意，俄罗斯将准备与他们就乌克兰的未来进行对话，但莫斯科将捍卫自己的利益。
乌总统泽连斯基最近在讲话中仍表示，乌军2024年的计划不仅仅是防御，但据近期与他私下会面的美国官员说，在美方援助尚不明确的情况下，泽连斯基也对今年可能取得的战果有所怀疑。作为乌克兰迄今为止最大的资金和装备捐助国，以及这项多边计划的协调国，美国希望在今年春天公布自己的10年承诺，但总统拜登所提的约610亿美元援乌补充资金在国会仍遭遇来自共和党人越来越大的阻力。加之前总统特朗普日前在初选中接连取得压倒性胜利，更为这项长期政策增添不确定性。situs kiu online
Gunakan kueri di bawah ini untuk mencari M Twinbet 188 yang dicari:
- M Twinbet 188
- Twin Spin Slot Gratis
- Twinbet 188
- Link Twinbet
- Twin Happiness Slot
- Twin Usb Joystick Slot 1 Not Recognized
Our Twin Slot System has an industry standard 32mm pitch.
Twin Slot uprights are available in a choice of three finishes; white, black or chrome and in a range of sizes from 45cm (1.5ft) through to 242cm (8ft).
From stock we can offer a whole range of twin slot shelving accessories that can be mixed and matched to create a display specific to your needs.
You can create a versatile storage and display solution with our twin slot system.
Due to it’s simplistic design, twin slot is quick and easy to install. It is an ideal solution for offices, storage areas, educational and home settings as well as retail displays.
We offer a wide range of brackets, arms, rails and accessories to customise your display.
Our twin slot shelving system can be easily adjusted to make varied and effective displays to ensure your customers get the best possible product and brand visibility.